| All Controller Electronics are on board the Subwoofer CB 118, which has 2 controller cards installed switchable via control knob either into SESSION or SAT Mode.The CB 118 switched to Session mode offers 3-way active power controlling 1500 Watts per side.
On board Controller Electronics contain active stereo x-over /Multi-Band compression / limiting and EQ Filtering to get the utmost performance of the Speaker System. Symmetric XLR inputs, 4 indicators LED, 3 step Bass Control knob, 60° by 40° constant directivity.
The Mid-High Speaker CM 215 is a 15’’ / 2’’ design that can also be used as a floor monitor due to its wedge shape.
Session - covers up to 1000 people
out of a Mini Van
The on-board passive x-over must be switched to active when used as a SESSION Top. Switch to passive when in use with a single CB 118 in a SAT configuration.
The SESSION is a heavy duty PA System for up to 1000 people, easy to set up, easy to handle and to transport hooked up within minutes.
A 4-wire Speakon cable connects the CB 118 to the CM 215. Due to its 3-way active configuration this lay-out is mandatory. Integrated mount adapters on the CM 215 and on the CB 118 bring the top speaker to neccessary height above spectators ears.
The subwoofers that house active electronics are designed to offer more protection than any flight case is able to do. In other words it is better protected in the speaker cabinet than in any road case.
The cabinet absorbs shocks, humidity and dust and the large front plate surface helps with heavy duty fan cooling to drive the amplifiers in low temperature even at highest output levels.
This makes on board KS electronics a reliable and long lasting tool for the user.
Watts always in rms - dB always in spl peak.
back
|
